UT-CS
UTILITY TRAILERS
Get from point A to B with the most reliable equipment hauler on the road.
CornPro standard features are too numerous to count — but we’ll try. Haul what you want on a 5” channel frame, with 4” channel tongue, Dexter Torflex torsion axles, on center cross members and bulkhead tubing frame.
And load it easily with 15” wide, 60” long tread plate ramps and low profile fenders.
Available colors
| Model | GAWR | GVWR | Curb Wt. | Payload | Length |
|---|---|---|---|---|---|
| UT-18 CS | 3,500 | 7,000 | 2,240 lbs | 5,460 lbs | 18′ |
| UT-20 CS | 3,500 | 7,000 | 2,400 lbs | 5,300 lbs | 20′ |
Always Included
- 5” structural channel frame
- 16″ on center cross-members
- 3”x 2”x 3/16” cross members
- 2”x 3/8” rub-rail
- 4” channel tongue
- 30” 11-gauge angled tail
- Rear ramp storage
- 81” width (between fenders)
- Dexter Torflex torsion axles
- All-axle electric brakes
- Rubber-mounted LED lighting
- 100% welded stake pockets
- Treated and kiln-dried pine decking
- Bead-blasted pre-paint
- PPG epoxy primer and urethane paint
MAKE-IT-YOUR-OWN
- Gooseneck
- Ladder ramps
- Dovetail cleats
- Full/split gates
- 5K axles
- Spare tire/wheel
- Blackout package
Curb weight is based on a standard model unit with no options.
**Payload is calculated on 10% transfer weight on bumper hitch when weight is distributed evenly.
**Payload is calculated on 10% transfer weight on bumper hitch when weight is distributed evenly.
*some pictures still show the last generation of logos and graphics, only the “new” logos/graphics are available